|
Monday, 16 August 2010 |
|
 Two aluminum wheels in either gun metal (16181) or black finish (16182) are now available. Each aluminum wheel comes with center screw, steering sponge and decrease angle spacer. This wheel will fit any KO PROPO transmitter.
Also shown are the transmitters installed with gun metal and black function buttons. The buttons can only be installed through our service department or special ordered with a new transmitter. They will not be sold seperately as the transmitter will have to be disassembled to be installed. |
|
|
Tuesday, 04 August 2009 |
|
 EX-5 UR 2.4GHz
#80098 & #80099 KO PROPO America has two new exclusive sets for the North & South American markets. The EX-5 UR 2.4GHz will now be offered with two of the KR-210S (2 channel) receivers (#80098) at a lower cost. The other set includes one KR-210S (2 channel) receiver and one PDS-2511 (digital, metal geared) servo (#80099) as a great upgrade for RTR kits looking to go digital 2.4GHz. |
|
|
Thursday, 23 April 2009 |
|
 VFS-1 BMC v1.5 #40051
Version 1.5 of the BMC has proved itself at the ROAR Carpet Nationals with 3 TQ positions and 2 wins in it's first outting. Five new preset programs and now you can adjust the drag brake through the setup switch in 10% increments (OFF-50%). All specs are the same as the original 1.0 version, but you will also be able to to take advantage of the Stock Motor Manager for increased timing once available. |
|
|
Thursday, 04 December 2008 |
|
| VOLTAGE: | 6V | | TORQUE: | 62.1 oz | | SPEED: | 0.09 S @ 60° | | BEARINGS: | No | | LEAD CONNECTOR: | GOLD PLATED | | GEARS: | METAL | | WEIGHT: | 18.2 g | | SIZE: | 30x12x26 mm |
Features KO's digital technology including ICS which means it can also be programmed.
The PDS-3101 ICS Digital Micro servo has metal gears and is designed for 1/16th or similar scale vehicles. This is our high speed type servo, great for those looking to upgrade to a digital metal geared servo. |
|
|
Thursday, 04 December 2008 |
|
| VOLTAGE: | 6V | | TORQUE: | 149.1 oz | | SPEED: | 0.16 S @ 60° | | BEARINGS: | YES, DBL | | LEAD CONNECTOR: | GOLD PLATED | | GEARS: | METAL | | WEIGHT: | 46.5 g | | SIZE: | 41x21x31.8 mm |
Great budget minded servo that features KO's digital technology including ICS which means it can also be programmed.
The PDS-2512 ICS Digital Mid Profile servo comes with all metal gears. This new size is in-between our low profile and standard size servo case. This is our high torque type servo great for those looking to upgrade to a digital metal geared servo on a budget. |
|
|
Thursday, 04 December 2008 |
|
| VOLTAGE: | 6V | | TORQUE: | 132.5 oz | | SPEED: | 0.13 S @ 60° | | BEARINGS: | YES, DBL | | LEAD CONNECTOR: | GOLD PLATED | | GEARS: | METAL | | WEIGHT: | 46.5 g | | SIZE: | 41x21x31.8 mm |
Great budget minded servo that features KO's digital technology including ICS which means it can also be programmed.
The PDS-2511 ICS Digital Mid Profile servo comes with all metal gears. This new size is in-between our low profile and standard size servo case. This is our high speed type servo great for those looking to upgrade to a digital metal geared servo on a budget. |
|
|
Aluminum Upper Case #35024 |
|
Wednesday, 20 August 2008 |
 Aluminum Upper Case |
|
|
Friday, 27 June 2008 |
|
 VFS-1 BMC with no heat-sink The VFS-1 BMC uses KO PROPO's patented VFS technology.
Five preprogrammed settings (Power, Mild, Smooth, Touring Car, Buggy)
Overheat & Current Overload protection equipped
Motor Limit: 4.5T (with heat sink and fan installed, 2.5T)
Size: 33.4 x 37.0 x 16.8 (mm) Weight: 30.8g
Max Peak Current: 3120A (FET Specifications)
Max Continuous Current: 780A (FET Specifications) VFS technology allows you to program and fine tune:
Drive frequencies (2KHz~12.0KHz) for 32 throttle steps for more control/efficiency
Brake Frequency (500Hz~2.5kHz) 64 settings
Drag Brake (off~255 step adjustment)
Three battery settings [NiMh (4C), NiMh (5,6C), LiPo] Optional Items for the VFS-1 BMC
VFS-1 BMC World Spec Kit (Cooling Fan & Heat Sink) #45521 (December 8, 2008)  World Spec Kit
Increases efficiency of FETs by keeping them cooler.For setting help click here. |
|
|
Wednesday, 23 April 2008 |
|
 EX-1 UR
High-speed experience directly at your fingertip!
The new EX-1 UR features a newly designed super high speed CPU with a faster Ultra Response Mode (UR) along with Advanced-Super-Normal modes, 30 model memory, super stable performance of the super module, quicker response with the smaller diameter wheel & decrease angle spacer and new tirgger material. For more information on specs, click here. 80180 EX-1 UR (Tx Only) | 80181 EX-1 UR 27MHz (Tx/Rx) | 80190 EX-1 UR 2.4GHz (Tx/Rx) | 80192 EX-1 UR 2.4GHz for Mini-Z (Tx/module)
|
|
|
|
What's New